Description
This is the Axial Wraith Jeep Wrangler Poison Spyder Rock Racer Ready-to-Run Truck with 2.4GHz radio system.
Features
- Chassis: Full tube composite chassis
- Drive: Four wheel with locked differentials and offset pumpkin formore ground clearance and a better driveshaft angle, AR60 OCP-Axleconstructed from high strength, low flex composite material, axletubes are reinforced and beefed up with a boxed-in axle truss todistribute stress over a larger area
- Radio: AX-3 2.4GHz 2-channel with steering and throttle trim andreverse
- ESC: AE-2 with LiPo cutoff, drag brake, Tamiya connector, and isprogrammable with the Castle Link programmer (not included)
- Motor: 20 turn
- Body: Officially licensed Jeep Wrangler body with Poison Spydergraphics
- Battery Tray: Sized for standard stick pack and LiPo packs up to1.8×5.9×1.1″ (47x150x28mm) in size
- Suspension: True four link
- Shocks: Composite body
- Wheels: Officially licensed Trail Ready HD series beadlock, wheelsmount to any Axial Wraith, AX10 Ridgecrest or SCX10
- Tires: BFGoodrich Krawler T/A KX
TRAIL READY HD SERIES IFD BEADLOCKWHEELS
Officially licensed Trail Ready HD Seriesbeadlock wheels dressed in an aggressive all black style are easy to assembleand they work with most 2.2 tires. The hub design allows this wheel to mount toany Wraith, AX10 Ridgecrest or SCX10. The IFD (Interchangeable Face Design)wheel system makes it easy to dress it up with a new look.
- Three piece beadlock design
- Plastic hub adapter eliminates the needfor an aluminum hex hub
- Adjustable breather holes for finetuning tire performance
- Compatible with most 2.2 tires
- Easy six screw disassembly
ADJUSTABLE BREATHER HOLE DESIGN
The wheel design allows you to vary theamount of air passing through the breather holes. You can select between havingone, two or three open holes (two, four or six total) by rotating the inner(beadlock) ring. The position is locked with reassembly.
BFGOODRICH KRAWLER T/A KX TIRES
Officially licensed BFGoodrich KrawlerT/A KX tires! In the full-size offroad world, they are the winner of morerock-crawling championships than all other tires combined (Race spec tire,Years 2004 through 2008). The Axial version captures the same aggressive lookyouve been waiting for.
4-LINK SUSPENSION
The suspension geometry utilizes a 4-Linkdesign which is optimized to reduce axle steer and to have the proper amount ofanti-squat and roll characteristics. The 4-Link system also aids againstsuspension wrap-up in high power applications.
EASY DIFF ACCESS
A locked differential will provide themost positive wheel traction in all off-road environments and conditions. Thelocked differential also provides less maintenance over oil-filled or siliconebased differentials. Easily serviced by removing four screws to gain access formaintenance, rebuilding and performance tuning.
AE-2 ESC WITH DRAG BRAKE
The Axial AE-2 ESC was developed inpartnership with Castle Creations and features LiPo cutoff, drag brake fortough crawling situations, a Tamiya style plug connector and is programmablevia Castle Link (Castle Link not included).
PROTECTIVE TRANSMISSION COVER
Helps keep dirt and debris out of yourpinion and spur gear for a quiet and efficient drive train.
SLIPPER CLUTCH
Allows the motor to work more efficientlyand greatly enhances the durability of the drivetrain allowing the transmissionto slip in hard binds.
PROTECTIVE ELECTRONICS BOX
Designed to protect the electronics fromsome serious off-road dust and debris.
PERFORMANCE COMPETITION SHOCKS
Axial competition shocks feature threadedshock bodies for tuning and easy pre-load adjustment, 3.5mm shock shafts forreduced lateral movement, silicone diaphragms for a more consistent feel andsilicone bushings to prevent binding. These shocks are also upgradable with avariety of aluminum options to further increase suspension performance.
AR60 OCP-AXLE OFF CENTER PUMPKIN DESIGN
Locked differentials provide better rockcrawling capabilities and the offset pumpkin gives you more ground clearanceand a better driveshaft angle. The rear axle has been shaved of any unnecessaryitems to achieve as much ground clearance as possible by removing steeringlinkages that normally stick down causing clearance issues. To spread stressload, the AR60 OCP-Axle tubes are beefed up with boxed-in sections starting onthe pumpkin side past the center of axle. The AR60 OCP-Axle is fabricated withpick-up points for a 4-Link Suspension in conjunction with the geometryspecifications. The AR60 OCP-Axle is constructed from high strength compositematerial, more expensive than standard glass filled nylon. The properties ofthe composite material has a low material flex rate similar to glass fillednylon, but not as brittle.
FULL TUBE FRAME COMPOSITE CHASSIS
The most realistic high strengthcomposite tube frame chassis. Based on the Night Stalker II Chassis built byJake Hallenbeck. Our high strength composite plastic is impact resistant tohelp protect the Wraith from crash damage.
POWER SWITCH
Conveniently located under the dash.
20T MOTOR
Tearup the terrain, be it flat out desert, rocky roads or crawling! Easy operation:no tuning, no fuel, no loud exhaust noise. Just plug’n’go! The design allowsfor optional 550 size motors to fit as well.
Includes: RTR Jeep Wrangler Wraith-Poison Spyder with 2.4GHz Radio, Motor, ESC,and Instructions
Specifications:
Wheelbase: 13.98″ (355mm)
Ground Clearance: 2.8″ (71.6mm)
Height: 9.1″ (232mm)
Width: 11.22″ (285mm)
Length: 19.25″ (489mm)
Weight: 5.45lbs (2.47kg)
Requires:
7.2V Stick Battery Pack and Charger
AA batteries for transmitter
Reviews
There are no reviews yet.