Description
Intelligent CFS: CFSx4 delivering up to 16 colors 350x350x350mm: More space for creativity Step-servo Motor System: 30000mm/s² acceleration and quiet Actively Heated Chamber: Supporting engineering filaments Dual AI Cameras: Smart to adjust flow rate and alert failures Sturdy “Matrix” Frame: Die-cast tech for superb rigidity *K2 Plus Combo: K2 Plus + 1* CFS+4*500g filament（In the box）Take a Closer Look
Intelligent Management of Multiple Filaments
Auto Identification&Mapping | Auto Run-out/Tangle Detection
Auto Filament Switch & Relay | Moisture-proof Filament Storage
Spring-loaded Batten Bar | Cardboard Spool Compatibility
16 Colors Level Up Your Creativity
The CFS comes with a connection hub on the back. By hooking up as many as four CFS units together, you are able to print in the splendor of 16 colors. Saves the need for extra painting afterward.
Powerfully Built “Matrix” Frame
A Sturdy, King-sized Beast
Dual Z-axis Assisted by 4 Linear Rods
Extremely steady while carrying the print bed up and down. Virtually no layer shift.
5mm Thick Aluminum Alloy Heatbed
Holding exceptionally well against deformation and vibration.
Cutting-edge Step-servo Motor x 5
Incredibly Quiet While Printing Hard
The working noise of K2 Plus is only 45dB, which is credited to the virtue of step-servo motors, dynamically balanced fans, and a snug enclosure It is no louder than someone typing on a laptop PC, truly a creative machine you can work next to.
Blazing Speed, a New Record
For a large-format machine, 600mm/s is pretty fast, but that’s not the whole story. Turbocharged by the step-servo motors, it can accelerate at a staggering 30000mm/s².
Active Belt Tensioning
Timing belts may get loose over time, leading to poor print quality and accuracy.
On the K2 Plus, the belt tension is checked and rigged actively by a pressure sensor instead of marhually. Now, belt tensioning is a thing you can forget about.
Automated Run-out & Sensor Filament Cutter
The steel-bladed cutter features a magnetic retraction mechanism for precise filament positioning and minimal waste, with an indicator to replace the filament when only one inch remains.
Next-gen Direct Drive Extruder
So Many Features Neatly Packed
40mm³/s High-flow Hotend
Powered by an 80W heater, the flow rate of ABS at 280℃ can reach 40mm³/s, 66% higher than the previous design.
Actively Heated Chamber & High-temp Nozzle with Hardened Steel Tip
Empowering More Use Scenarios & Phenomenal Print Quality, Every Time
Two Auxiliary Fans Set the Style Right Off
The part cooling airflow is nearly doubled with two auxiliary cooling fans installed on both sides of the chamber, ensuring model shapes and details are set before any stringing or warping occurs.
Dual Al Cameras and Many More Advanced Intelligence Has Your Back
Chamber AI Camera Keeps a Keen Watch
K2 Plus uses an Al camera on the chamber side to watch over spaghetti failure, foreign objects, idling, etc. It will alert you when an error occurs. It also supports real-time monitoring and time-lapse filming.
Toolhead Al Camera
Tunes the Flow Rate
Ingenious Anti-tilt Auto Leveling
K2 Plus features dual independently motorized Z-axes for automatic tilt reduction, strain gauge-based auto-leveling compensation, and a pro-level first layer capability that ensures a smooth and neat initial layer without manual intervention.
Smarter Software for a Seamless Workflow
The latest Creality OS will unlock the full power of your 3D printer. It features smart multi-filament management and allows for fire-tuning in expert mode or with root access. FLUIDD WebUI is also supported for your convenience.
User-friendly Like a Household Appliance
K2 Plus is pre-assembled, so you can use it right after unpacking and screen installation. Then, a boot-up quick guide covers self-tests.
K2 Plus Combo 3D PrinterPrinting Technology: Fused Deposition ModelingBuild Volume: 350*350*350mmK2 Plus Dimensions: 495*515*640mmK2 Plus Combo Dimensions: 495*515*916mmK2 Plus Net Weight: 35KgPrinting Speed: <600mm/sAcceleration: 30000mm/s²Printing Accuracy: 100mm±0.1mmLayer Height: 0.05-0.3mmExtruder: Dual-gear direct drive extruderFilament Diameter: 1.75mmNozzle Diameter: 4mmNozzle Temperature: ≤350°CHeatbed Temperature: ≤120°CChamber Temperature: ≤60°CBuild Plate: Flexible build plateLeveling Mode: Full-auto LevelingXYZE Motor: Servo-step motorFile Transfer: USB Drive/Ethernet/WiFiFile Storage: 32GB EMMCWifi: 2.4GHz/5GHzRFID Sensor in Printer: IncludedRated Voltage: 100-240V~ AC 50/60HzDisplay Screen: 4.3″ color touch screenRated Power: 1200WSupported Filaments: PLA/ABS/PETG/PA-CF/ PLA-CF/ PET/ASA/PPA-CFAl Camera for Monitoring: StandardAl Camera for Calibration: StandardPower Loss Recovery: YesAuto Filament Relay: YesFilament Tangle Detection: YesAir Purifier: YesInput Shaping: YesLighting kit: YesActive Bed Tilt Calibration: YesActive Belt Tensioning: YesActive Chamber Heater: YesRFID-tagged Filaments: YesPrintable File Format: Gcode/3MFCFS Compatibility: YesNumber of CFS Extensions: ≤4Slicing Software: Creality Print 5.0 or newer versionsUI Languages: English/German/Spanish/French/Italian/ Portuguese/Russian/Turkish/Japanese/ Korean/ChineseCFS SPECIFICATIONSProduct: CFSDimensions: 379*314*276 mmNet Weight: 4.56kgNumber of Filament Slots: 4Drying Method: DesiccantFilament Buffer: IN*4 & OUT*1Number of Extensions: ≤4RFID Filament Recognition: YesFilament Diameter: 1.75±0.05mmSupported 3D Printer: K2 PlusConnection Port: Creality 485 *2Power Supply: DC 24V (No need of extra power supply while connected to K2 Plus)Rated Power: 20WStatus Indicator: Indicator light (white/red) x 4Display Screen: Segment LCD showing temperature and humidityFilament Spool Compatibility: 1Kg filament spool; diameter: 197-202mm, thickness: 42-68mmSupported Filaments: PLA/PETG/ABS/ASA/PET/PLA-CF; *Not compatible with flexible TPU damp BVOH/PVA, or warped cardboard spools.
Reviews
There are no reviews yet.